Double Cone Blender

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts are made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc


All contact parts are made out of stainless 304 or 316 quality material, as required by customer.

All safety guards & covers made out of SS304 in GMP Model.

The conical shape at both ends of Double Cone Blender enables uniform mixing and easy discharge.

Maximum care has been taken to ensure safe operation of Double Cone Blender

Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )

Two nos. of safety road will be provided at back side. ( One LH side & one RH side )

Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.

One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.

Cone will be mirror polished from the inside & outside & structure will be matt polished.

All moving parts covered with SS304 covers.

Safety guards made from SS304 pipes provided in front of the m/c with limit switch.

Worm reduction gear use for speed reduction.

General structure made out of SS304 and Polished to the matt / mirror finish ( as per customer requirement) in GMP Mode

Hand wheel will be provided for manual tilting of cone.

Safety guards provided with limit switch to not start the machine when safety guards are not in proper position